(Approved by AICTE, New Delhi and Permanently Affiliated to Anna University, Chennai)
Chettiyappanur, Vaniyambadi, Vellore District,Tamil Nadu - 635751
Ph:04174-227591. E-mail-Id:firstname.lastname@example.org, email@example.com
The Department of Mechanical Engineering came into being in the year 1999 and the first batch of Mechanical Engineers graduated in the year 2003. The department was first started with the intake strength of 40 seats in 1999. After, the intake was increased to 60 seats in 2004. At present the department offers 120 seats from 2014. The department has both undergraduate and postgraduate courses in Mechanical Engineering and Design. In the year 2013 Post Graduate Programme in Engineering Design was launched. The department has laboratory and workshop facilities with modern sophisticated equipment to carry out research in all areas related to Mechanical Engineering. Throughout its history, the department has provided a strong technical foundation to prepare students to meet the changing needs of industry.
To produce competent mechanical engineers specifically from rural based population to confront the latest technological innovations
1. Imparting quality education and training to nurture competitive mechanical engineers.
2. Motivating innovations in the various fields of mechanical engineering with better infrastructure facilities to meet the industrial and societal requirements
3. Inculcating ethical values in their careers for their successful life.
PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
PEO 1: Core Competence
Graduates will excel in their professional career with strong fundamental technical background.
PEO 2: Breadth
Graduates will be able to demonstrate their technical skills in designing, fabrication and installation of new mechanical components.
PEO 3: Lifelong Learning
Graduates will be competent to exhibit their multidisciplinary skills in related fields of Mechanical Engineering.
PEO 4: Professionalism
Graduates will pursue higher studies in mechanical related disciplines to work in the field of Teaching and Research.
PROGRAMME OUTCOMES (POs)
PO1: Engineering Knowledge
Apply the knowledge of mathematics, science, engineering fundamentals and core engineering for complex engineering problems.
PO2: Problem Analysis
Identify, formulate and analyze complex engineering problems.
PO3: Design and Development of Solutions
Design and develop solutions for complex engineering problems.
PO4: Investigation of Complex Problems
Use Research-based knowledge to conduct investigations of complex problems.
PO5: Modern Tool Usage
Apply appropriate modern tools and techniques to tackle Mechanical Engineering problems.
PO6: Engineer and Society
Provide solutions to Mechanical Engineering problems relevant to societal needs.
PO7: Environment and Sustainability
Acquire contemporary knowledge to sustain in the ever changing environment.
Apply professional ethics.
PO9: Individual and Teamwork
Exhibit individual and leadership qualities in multidisciplinary group.
Comprehend and communicate effectively in a team.
PO11: Lifelong Learning
Engage independently in life-long learning.
PO12: Project Management and Finance
Plan and manage a project in a cost effective manner.
The department laboratories are fully equipped with all required equipments and software needed for practical and Research oriented work of the students. The departments aspires to conduct symposium/energy club every year and inspires the students and faculty memberts to participate in various technical research activities.
01.Manufacturing Technology Lab-I
Centre Lathes with accessories, Arc welding machines, Gas welding machine, Hand Shear, Standard tools and calipers for sheet metal work, Moulding Table, Moulding boxes, Tools and Patterns, Injection Moulding Machine
Universal Tensile Testing machine with double shear attachment (40 Ton Capacity),Torsion Testing Machine(60 NM capacity), Impact Testing Machine(300 J Capacity), Brinell Hardness Testing Machine, Rock Well Hardness Testing Machine, Spring Testing Machine, Metallurgical Microscopes, Muffle Furnace(800 °C), Deflection Test on Beams, Disc polish Machine
1. Computer System
Specifications: 1.15.6” LCD Monitor, 2. i3-3320 CPU 3.30GHz processor, 4. 300 GB Hard disk, 5. 2GB Ram, Scientific Linux,
Software’s:Ansys Version 11.0 ,Autodesk AutoCAD 2011,Solid works 2010.
Specification: 1.Dell Precision Tower 3620 x Cto Base 2. E3-1225/ 16GB RAM 2.1 TB Hard disk and UBUNTU Linux
06.Thermal Engineering Laboratory – I
Red Wood Viscometer, Flash and Fire Point Apparatus,I.C Engine – 2 stroke and 4 stroke cut section model,4-Stroke Single Cylinder Diesel Engine with Mechanical loading, 4-Stroke Single Cylinder Diesel Engine with Electrical loading, Multi-cylinder Petrol Engine with Morse test facility, Multi Cylinder Diesel Engine with Hydraulic loading,2-Stroke Single Cylinder Diesel Enginewith Mechanical Loading, 4-Stroke Single Cylinder Petrol Engine with Mechanical Loading, Data Acquisition System setup, Steam Boiler with Turbine Setup
Cam Analyzer, Motorized Gyroscope, Governor Apparatus(Watts, Proell, Porter and Hartnell), Whirling of shaft apparatus, Balancing of reciprocating masses, Static and dynamic balancing machine, Vibration test facilities apparatus, Cantilever Beam Setup, Bifilar Suspension setup, Spring Mass System, Compound Pendulum, Turn Table Apparatus. Dynamic balancing machine, Stroboscope, Study of gear Trains setup
CNC lathes, CNC Milling Machines.
09.Metrology and Measurement Lab
Micrometers, Vernier Calipers, Vernier Height Gauges, Vernier Depth Gauge, Slip Gauge Sets, Gear Tooth Vernier, Sine Bar& Sine centre, Bevel Protractor, Floating Carriage Micrometer, Profile Projector, Mechanical Comparator, Temperature Measuring Setup, Displacement Measuring Setup(LVDT) , Force Measuring Setup, Torque Measuring Setup, Autocollimator, Tool Makers Microscope, Dial Gauge Calibration.
10.Thermal Engineering Laboratory II
Guarded plate apparatus, Lagged pipe apparatus, Natural convection apparatus, Forced convection apparatus, Pin-fin apparatus, Stefan-Boltzmann apparatus, Emissivitymeasurement apparatus, Parallel/counter flow heat exchanger, Two stage reciprocating air compressor, Refrigeration test rig, Air-conditioning test rig,Insulating Powder Apparatus ,Composite wall Apparatus, Fluidized bed water cooling Tower Apparatus.
Basic Pneumatic Trainer Kit, PLC trainer kit, Electro-Pneumatic Kit, 8051 – Microcontroller kit with stepper motor, HYDROSIM & PNEUMOSIM Software, LABVIEW software, Hydraulic Training kit, Air compressor, 8085 Microcontroller ,Traffic Light Interfacing, Image Processing, 5 Channel data logging Systems
12.Engineering Practice Laboratory
Carpentry vice (fitted to work bench),Standard woodworking tools, Arc Welding machines, Welding booths, Welding accessories like welding shield, chipping hammer, wire brush, etc, Gas Welding equipment’s with Oxygen and acetylene cylinder,Models of industrial trusses, door joints,furniture joints, Hearth furnace, anvil and smithy tools,Power Tools: Rotary Hammer, Demolition Hammer, Circular Saw, Planer, Hand Drilling Machine and Jigsaw,Study-purpose items: centrifugal pump, air-conditioner
Professor & Principal
Professor & HOD
Mr.S.ASHFAQUE AHMED M.TECH.,(Ph.D)
Mr.M.THAMARAI SELVAN M.E.
Mr.C.VINOTH KUMAR M.E.
Mr.D.DEEPAK KUMAR M.E.
National Level Technical Symposium MEXZION-17
Inaguration of Society of Automotive Engineers-2016
Guest Lecture on Image Processing-2016
Review of Diesal Engine, Latest Trends in Automobile Technology and Introduction to Application Engineering